Especially when it's a dead car battery, that can be so annoying and frustrating. You often feel trapped and unsure of your next steps. But don't worry! Here are some simple and effective ways you can repair your car battery and put it back on the road in no time! Plus, if you take care of your battery, you can help it run for longer and avoid problems later on
Baking Soda and Water — If your battery terminals are dirty and have a white powdery substance on them, you can clean them. You can do this by combining two tablespoons of baking soda with a splash of water to create a paste. Use this blend to scrub the terminals of the battery. This will aid in dirt, and any corrosion, the buildup that can occur, and getting it to be removed. The connection with the battery and your car will be much better once you clean the terminals, which might make your car start easier.
Jump start: In some cases, your battery could be completely dead and it won’t start your car at all. In this situation, you can jump start your battery with a working battery from another car. First, get that other car as close to yours as possible. Just hook up jumper cables to each battery. When possible, always connect the cables to the dead battery first. Once you’ve hooked them up, give it a few minutes. This gives your dead battery some time to charge before you attempt to start your car again
Epsom Salt and Distilled Water: If the acid level in your battery is low, then it might not be able to hold charge for a long time. You can mix epsom salt with distilled water to aid in this process. This then goes into the battery cells. This can improve the charge of the TOKUSHIMA automotive batteries for sale also as make it last for an extended time. But also be careful, and always follow the instructions on your battery, as some batteries cannot be filled in this manner.
Attach the Cables: Prepare your jumper cables. Step 1: Attach the TOKUSHIMA auto battery store to the positive terminal on the dead battery. Next, connect the other end of that cable to the positive terminal of the good battery. Then use the black jumper cable and attach it to the negative terminal on the working battery. Lastly, attach the opposite end of the black cable to a metal piece on the dead car, such as a bolt on the engine block. This provides an anchor for the connection.
Disconnect Cables: If the dead car is running and started, you can disconnect the jumper cables. Be sure to remove them in the reverse order you wore them. First, unhook the black cable from the metal part of the dead car, then the black cable from the working battery, the red cable from the other battery, finally, the red cable from the dead battery.
Consider the Weather: If you live in a region that gets extremely hot or cold, choose a TOKUSHIMA auto battery that performs better in those conditions. Cold Cranking Amperage (CCA) and Reserve Capacity (RC) become important in extreme weather and climate conditions so a battery with increased CCA or RC is always a good option.
EN
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
TL
ID
SR
SL
VI
SQ
HU
TH
TR
MS
GA
MK
HY
AZ
BN
MN
MY
KK
UZ
JOZO GROUP
